Actually a port can be untagged(access), tagged(trunk), or dual-mode
(tagged w/ native/access)
For dual mode you:
Vlan 2
tag eth 1
Vlan 3
tag eth 1
Vlan 4
tag eth 1
Int eth 1
dual mode 2
Will put the port as tagged in vlans 3 and 4, while simultaneously
being untagged in vlan 2.
Jared
On Mar 30, 2010, at 10:55 AM, "Brashear, Jonathan" <[email protected]
> wrote:
By default, FESXs can only have a port either tagged(trunk) or
untagged(access), not both.
Jonathan Brashear
Strategic Business Systems, Inc.
13800 Coppermine Road, Suite 400 | Herndon, VA 20171
Work: 214-887-7719 x 101-7719 | Cell: 214.850.5986
Please visit our web site at www.sbsplanet.com
-----Original Message-----
From: [email protected] [mailto:foundry-nsp-
[email protected]] On Behalf Of Joseph Jackson
Sent: Tuesday, March 30, 2010 11:47 AM
To: [email protected]
Subject: [f-nsp] unable to add untagged port to vlan
Hello,
On some FESX448's I have I am trying to add a trunk port (eth 9 to
10) to vlan 30 untagged.
It is a tagged member of other vlans. When trying to place them
untagged into the vlan I get this error message.
s...@lvretailfesx06(config-vlan-30)#untagged ethernet 9 to 10 error -
port ethe 9 to 10 are not member of default vlan
Been going through the docs but not finding out anything with this
error.
Port info
s...@lvretailfesx06(config-vlan-30)#sh inter eth 9
GigabitEthernet9 is up, line protocol is up
Hardware is GigabitEthernet, address is 0012.f28d.2cc0 (bia
0012.f28d.2cc8)
Configured speed auto, actual 1Gbit, configured duplex fdx, actual
fdx
Configured mdi mode AUTO, actual MDI
Member of 4 L2 VLANs, port is tagged, port state is FORWARDING
BPDU guard is Disabled, ROOT protect is Disabled
Link Error Dampening is Disabled
STP configured to ON, priority is level0
Flow Control is config enabled, oper enabled, negotiation disabled
mirror disabled, monitor disabled
Member of active trunk ports 9-10, primary port
Member of configured trunk ports 9-10, primary port
No port name
IPG MII 96 bits-time, IPG GMII 96 bits-time
IP MTU 1500 bytes, encapsulation ethernet
300 second input rate: 56 bits/sec, 0 packets/sec, 0.00% utilization
300 second output rate: 4144 bits/sec, 5 packets/sec, 0.00%
utilization
51148 packets input, 21116705 bytes, 0 no buffer
Received 1162 broadcasts, 2259 multicasts, 47727 unicasts
0 input errors, 0 CRC, 0 frame, 0 ignored
0 runts, 0 giants
27329907 packets output, 2754285747 bytes, 0 underruns
Transmitted 5554345 broadcasts, 20651264 multicasts, 1124298 unicasts
0 output errors, 0 collisions
Thanks!
Joseph
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
The information contained in this transmission may contain
privileged and confidential information.
It is intended only for the use of the person(s) named above. If you
are not the intended
recipient, you are hereby notified that any review, dissemination,
distribution or
duplication of this communication is strictly prohibited. If you are
not the intended recipient,
please contact the sender by reply email and destroy all copies of
the original message.
To reply to our email administrator directly, please send an email
to [email protected].
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
