I am trying to get IPv6 configured on an MLX and it doesn't seem to to be
working.
I have two routers connected to each other with ipv6 configured on a ve
thusly:
First Router
ipv6 unicast-routing
interface ve 197
port-name To SJC2
ip rip v2-only
ip address 216.52.87.245/30
ipv6 address 2620:0:5100::/64 eui-64
ipv6 enable
tel...@sjc-bgw-01#sho ipv6 interface ve 197
Interface VE 197 is up, line protocol is up
vlan id: 197
members: ethe 1/3 to 1/4
active: ethe 1/3 to 1/4
IPv6 is enabled, link-local address is fe80::21b:edff:feae:bc00
[Preferred]
Global unicast address(es):
2620:0:5100:0:21b:edff:feae:bc00 [Preferred], subnet is
2620:0:5100::/64
2620:0:5100:: [Anycast], subnet is 2620:0:5100::/64
Second Router
ipv6 unicast-routing
interface ve 197
ip rip v2-only
ip address 216.52.87.246/30
ipv6 address 2620:0:5150::/64 eui-64
ipv6 enable
tel...@sjc-bgw-02#sho ipv6 interface ve 197
Interface VE 197 is up, line protocol is up
vlan id: 197
members: ethe 1/3 to 1/4
active: ethe 1/4
IPv6 is enabled, link-local address is fe80::21b:edff:feae:de00
[Preferred]
Global unicast address(es):
2620:0:5150:0:21b:edff:feae:de00 [Preferred], subnet is
2620:0:5150::/64
2620:0:5150:: [Anycast], subnet is 2620:0:5150::/64
But I can not ping between them.
from the second router to the first:
tel...@sjc-bgw-02#ping ipv6 2620:0:5100:0:21b:edff:feae:bc00
Sending 1, 16-byte ICMPv6 Echo to 2620:0:5100:0:21b:edff:feae:bc00
timeout 5000 msec, Hop Limit 0
Type Control-c to abort
Request timed out.
No reply from remote host.
And sho ipv6 neigh shows only the link local IP, not the address I assigned:
tel...@sjc-bgw-02#sho ipv6 neigh
Total number of Neighbor entries: 1
IPv6 Address VLAN LinkLayer-Addr State Age Port
IsR
1 fe80::21b:edff:feae:bc00 197 001b.edae.bc00 STALE 1856ve
197 1
I am probably missing some very basic step someplace. Can anyone toss me a
clue?
George
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
