You realize you are using anycast addresses? On Sun, Apr 11, 2010 at 6:47 PM, George B. <[email protected]> wrote:
> I am trying to get IPv6 configured on an MLX and it doesn't seem to to be > working. > > I have two routers connected to each other with ipv6 configured on a ve > thusly: > > First Router > > ipv6 unicast-routing > interface ve 197 > port-name To SJC2 > ip rip v2-only > ip address 216.52.87.245/30 > ipv6 address 2620:0:5100::/64 eui-64 > ipv6 enable > > tel...@sjc-bgw-01#sho ipv6 interface ve 197 > Interface VE 197 is up, line protocol is up > vlan id: 197 > members: ethe 1/3 to 1/4 > active: ethe 1/3 to 1/4 > IPv6 is enabled, link-local address is fe80::21b:edff:feae:bc00 > [Preferred] > Global unicast address(es): > 2620:0:5100:0:21b:edff:feae:bc00 [Preferred], subnet is > 2620:0:5100::/64 > 2620:0:5100:: [Anycast], subnet is 2620:0:5100::/64 > > Second Router > > ipv6 unicast-routing > > interface ve 197 > ip rip v2-only > ip address 216.52.87.246/30 > ipv6 address 2620:0:5150::/64 eui-64 > ipv6 enable > > tel...@sjc-bgw-02#sho ipv6 interface ve 197 > Interface VE 197 is up, line protocol is up > vlan id: 197 > members: ethe 1/3 to 1/4 > active: ethe 1/4 > IPv6 is enabled, link-local address is fe80::21b:edff:feae:de00 > [Preferred] > Global unicast address(es): > 2620:0:5150:0:21b:edff:feae:de00 [Preferred], subnet is > 2620:0:5150::/64 > 2620:0:5150:: [Anycast], subnet is 2620:0:5150::/64 > > But I can not ping between them. > > from the second router to the first: > > tel...@sjc-bgw-02#ping ipv6 2620:0:5100:0:21b:edff:feae:bc00 > Sending 1, 16-byte ICMPv6 Echo to 2620:0:5100:0:21b:edff:feae:bc00 > timeout 5000 msec, Hop Limit 0 > Type Control-c to abort > Request timed out. > No reply from remote host. > > And sho ipv6 neigh shows only the link local IP, not the address I > assigned: > > tel...@sjc-bgw-02#sho ipv6 neigh > Total number of Neighbor entries: 1 > IPv6 Address VLAN LinkLayer-Addr State Age Port > IsR > 1 fe80::21b:edff:feae:bc00 197 001b.edae.bc00 STALE 1856ve > 197 1 > > I am probably missing some very basic step someplace. Can anyone toss me a > clue? > > George > > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
