Hi, > Colleagues, hi again > > I need an MLX-8 with redundant route processor, switch fabric and power; > seven 10Gx4 linecards and single 20-port GE/SFP. > > Whether the following spec correct and confirm these requirements? - > > NI-MLX-8-AC (NI MLX 8-SLOT CHASSIS, 1 MR, 2 SF3, 2 AC) :: 1 > NI-MLX-MR (NI MLX MANAGEMENT MODULE) :: 1 > NI-MLX-10GX4 (NI MLX 4-PORT 10GE) :: 7 > NI-MLX-1GX20-SFP (NetIron MLX Series 20-port FE/GE (100/1000)) :: 1 > > Also, whether these are correct transceivers for TGE and GE linecards? - > > 10G-XFP-LR (OPTIC, 10GBE, LR, XFP, SMF, LC CONNECTOR) > E1MG-LX (1000BaseLX SFP optic SMF, LC connector) > > and is it mandatory to use Brocade's own transceivers (as Cisco requires) or > it's ok to use anything?
All correct, and no, you dont have to use Brocade's own receivers. Best regards, Michiel Muhlenbaumer Atrato IP Networks _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
