Hi Gary,
What is the output of the command 'hw bc'?
And maybe you can post your complete configuration (show run)?
Thanks!
make fun
same to you ;)
Best,
- Jeroen
DELOBEL Gary schreef:
Hi,
we have some loss on jetcore router (~10%) but cpu at 1% and memory at
67%
tel...@br1-uro(config-bgp)#sh ver
SW: Version 08.0.01tT53 Copyright (c) 1996-2004 Foundry Networks, Inc.
Compiled on Mar 04 2009 at 23:23:14 labeled as B2P08001t
(4147833 bytes) from Secondary B2P08001t.bin
HW: NetIron 400 Router, SYSIF version 21, Serial #: Non-exist
==========================================================================
SL 1: J-BxGMR4 JetCore Management Module, SYSIF 2 (Mini GBIC), M4, ACTIVE
Serial #: CH13041971
4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 8a
32768 KB PRAM and 2M-Bit*1 CAM for IGC 0, version 0449
32768 KB PRAM and 2M-Bit*1 CAM for IGC 1, version 0449
==========================================================================
Active management module:
466 MHz Power PC processor 750 (version 8/8302) 66 MHz bus
512 KB boot flash memory
16384 KB code flash memory
512 KB SRAM
512 MB DRAM
The system uptime is 3 hours 34 minutes 1 seconds
The system started at 07:12:16 GMT+00 Thu Jul 01 2010
The system : started=warm start reloaded=by "reload"
Crash time : 11:42:20 GMT+00 Sat Feb 20 2010
tel...@br1-uro(config-bgp)#sh pro cpu
Process Name 5Sec(%) 1Min(%) 5Min(%) 15Min(%) Runtime(ms)
ACL 0.00 0.00 0.00 0.00 0
ARP 0.23 0.22 0.26 0.23 30821
BGP 0.08 0.43 0.29 0.29 277288
DOT1X 0.00 0.00 0.00 0.00 0
GVRP 0.00 0.00 0.00 0.00 0
ICMP 0.00 0.00 0.00 0.00 495
IP 0.30 0.48 0.46 0.43 72094
IP_M 0.00 0.00 0.00 0.00 234
IPUP 0.06 0.11 0.11 0.11 21997
ISIS 0.00 0.00 0.00 0.00 0
L2VLAN 0.01 0.02 0.02 0.02 2819
NAT 0.00 0.00 0.00 0.00 0
OSPF 0.00 0.00 0.00 0.00 0
RIP 0.00 0.00 0.00 0.00 1
STP 0.00 0.00 0.00 0.00 39
VRRP 0.03 0.04 0.04 0.04 6313
IPv6 0.02 0.02 0.03 0.03 4110
ICMP6 0.05 0.06 0.06 0.06 9226
ND6 0.00 0.00 0.00 0.00 12
RIPng 0.00 0.00 0.00 0.00 12
OSPFv3 0.00 0.00 0.00 0.00 0
IPV6_RX 0.00 0.00 0.00 0.00 484
same after reboot
do you have any idea?
Best Regards
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
