I agree there is support for the relay agents but there is no DHCPV6 server, correct?
harbor235 On Tue, Aug 24, 2010 at 9:13 AM, Brashear, Jonathan <[email protected] > wrote: > The RX series supports IPv6 relay agents for DHCP as well as IPv6 routing > as of v2.702; the XMR/MLX series has the same as of v4.0.01. Also, most > versions of the CER/CES series support DHCPv6(the CES 2000 series base > package being the exception). > > Jonathan Brashear, BCNE > Strategic Business Systems, Inc. > 13241 Woodland Drive, 2nd Floor | Herndon, VA 20171 > Work: 214-887-7719 x 101-7719 | Cell: 214.850.5986 > Please visit our web site at www.sbsplanet.com > > > -----Original Message----- > From: [email protected] [mailto: > [email protected]] On Behalf Of harbor235 > Sent: Monday, August 23, 2010 1:18 PM > To: [email protected] > Subject: [f-nsp] dhcpv6 > > > Does anyone know if any Brocade/foundry hardware supports DHCPV6? > The applicable commands do not appear in the command line although they say > they support it. > > Does anyone one else know of any Brocade/Foundry limitations as far as IPV6 > goes? > thanx > > > harbor235 > > > > > > The information contained in this transmission may contain privileged and > confidential information. > It is intended only for the use of the person(s) named above. If you are > not the intended > recipient, you are hereby notified that any review, dissemination, > distribution or > duplication of this communication is strictly prohibited. If you are not > the intended recipient, > please contact the sender by reply email and destroy all copies of the > original message. > To reply to our email administrator directly, please send an email to > [email protected]. > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
