Hi Jared,

Very cool.  I will give it a shot also when I get a chance.

Thanks for everything

Joe

On 10/28/2010 11:28 AM, Jared Valentine wrote:
I tried it on a Foundry switch and it seems to take it.  The config looks
like this:

router vrrp
interface ve 1
  ip address 192.168.1.1 255.255.255.0
  ip address 192.168.2.1 255.255.255.0
  ip vrrp vrid 1
   owner
   ip-address 192.168.1.1
   ip-address 192.168.2.1
   activate



FCX648SHPOE Router(config)#show ip vrrp
Total number of VRRP routers defined: 1
Interface ethernet v1
  auth-type no authentication
  VRID 1
   state initialize
   administrative-status enabled
   mode owner
   priority 255
   current priority 255
   hello-interval 1000 msec
   ip-address 192.168.1.1 192.168.2.1
   virtual mac address 0000.5e00.0101
   advertise backup: disabled


-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Joseph Hardeman
Sent: Thursday, October 28, 2010 6:26 AM
To: [email protected]
Subject: Re: [f-nsp] VRRP ip-address question

Hi Everyone,

I just looked at what I put down in the example and realized it was
totally wrong.  Should be:

interface ve 100
    ip address 192.168.1.1 255.255.255.224
    ip address 192.168.2.1 255.255.255.254
ip vrrp vrid 100
    ip-address 192.168.1.1
    ip-address 192.168.2.1

Anyone have any thoughts on this?

Joe

On 10/27/2010 8:42 PM, Joseph Hardeman wrote:
Hi Everyone,

This may be a silly question, but I was doing some thinking and wanted
to know if it was possible.

If I have a VLAN with multiple subnets on it, for example
192.168.1.1/27 and 192.168.2.1/28, can the vrrp that handles that
virtual router interface handle multiple ip-address(es) in a single
"ip vrrp vrid" section or would there need to be multiple "ip vrrp
vrid" sections on the interface?

For example:

interface ve 100
   ip address 192.168.1.1 255.255.224.0
   ip address 192.168.2.1 255.255.254.0
ip vrrp vrid 100
   ip-address 192.168.1.1
   ip-address 192.168.2.1

I am just curious if this would work.  I haven't tried it, but I would
think it would.

I hope I asked that right. :-)

Thanks

Joe
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp


_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp

Reply via email to