Hi, we have some boxes (mostly BI 4k/8k) on running Jetcore modules and SW B2P08001w. Currently a typical config towards a network looks like this: vlan 436 name DFUE-FIELDSR1-NW/#28311146/RED-0 by port untagged ethe 8/20 to 8/24 ip-subnet 10.238.20.0 255.255.255.0 name DE-B73_HEAD/#42574412/RED-0 static ethe 8/20 router-interface ve 20 ip-subnet 10.238.21.0 255.255.255.0 name DE-GAB_HEAD/#53636326/RED-0 static ethe 8/21 router-interface ve 21 ip-subnet 10.238.22.0 255.255.255.0 name DE-UBR_SUB/#61252273/RED-0 static ethe 8/22 router-interface ve 22 ip-subnet 10.238.23.0 255.255.255.0 name DE-DIZ_SUB/#38524742/RED-0 static ethe 8/23 router-interface ve 23 ip-subnet 10.238.24.0 255.255.255.0 name DE-BZH_SUB/#26827471/RED-0 static ethe 8/24 router-interface ve 24
So, my first attempt was to create a ipv6-subnet in the VLAN: SSH@GF(config-vlan-436)#ipv6-proto name Testbed_V6 error - failed to create IPv6 protocol vlan because IP subnet vlan was configured Okay, so i tried the hard way by putting a v6 address on the existing VE interface: SSH@CR-X-GDF-5(config-vif-23)#ipv6 enable SSH@CR-X-GDF-5(config-vif-23)#ipv6 address fc55:cafe:cafe:cafe::1/64 But nope, no luck: SSH@CR-X-GDF-5#sh ipv6 interface ve 27 Interface VE 23 is down, line protocol is down vlan id: 0, vlan index: 0, ve type: 0 members: none active: none IPv6 is enabled, link-local address is Global unicast address(es): Joined group address(es): Any ideas/hints how to configure dual-stack IPv6 on those boxes? The Foundry documentation was not that helpful… Thanks, Chris _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
