Hi Chris, What I have been doing for some time now is the following:
Create VLAN Add router-interface to VLAN Add ve with IPv4 and IPv6 address. ! vlan 203 by port tagged ethe 1/4 to 1/8 ethe 2/1 router-interface ve 203 ! interface ve 203 ip address xx.xx.xx.xx/24 ipv6 address xxxx:xxxx:xxxx:xxxx::1/64 ipv6 enable ipv6 nd suppress-ra ip vrrp-extended vrid 203 backup priority 100 track-priority 20 ip-address xx.xx.xx.xx track-port e 1/1 enable ! The only unfortunate thing is that VRRP-e doesn't support IPv6. Regards, Mischa On Feb 07, 2011, at 11:29 , Chris Hellkvist wrote: > Hi, > > we have some boxes (mostly BI 4k/8k) on running Jetcore modules and SW > B2P08001w. Currently a typical config towards a network looks like > this: > vlan 436 name DFUE-FIELDSR1-NW/#28311146/RED-0 by port > untagged ethe 8/20 to 8/24 > ip-subnet 10.238.20.0 255.255.255.0 name DE-B73_HEAD/#42574412/RED-0 > static ethe 8/20 > router-interface ve 20 > ip-subnet 10.238.21.0 255.255.255.0 name DE-GAB_HEAD/#53636326/RED-0 > static ethe 8/21 > router-interface ve 21 > ip-subnet 10.238.22.0 255.255.255.0 name DE-UBR_SUB/#61252273/RED-0 > static ethe 8/22 > router-interface ve 22 > ip-subnet 10.238.23.0 255.255.255.0 name DE-DIZ_SUB/#38524742/RED-0 > static ethe 8/23 > router-interface ve 23 > ip-subnet 10.238.24.0 255.255.255.0 name DE-BZH_SUB/#26827471/RED-0 > static ethe 8/24 > router-interface ve 24 > > So, my first attempt was to create a ipv6-subnet in the VLAN: > SSH@GF(config-vlan-436)#ipv6-proto name Testbed_V6 > error - failed to create IPv6 protocol vlan because IP subnet vlan was > configured > > Okay, so i tried the hard way by putting a v6 address on the existing > VE interface: > SSH@CR-X-GDF-5(config-vif-23)#ipv6 enable > SSH@CR-X-GDF-5(config-vif-23)#ipv6 address fc55:cafe:cafe:cafe::1/64 > > But nope, no luck: > SSH@CR-X-GDF-5#sh ipv6 interface ve 27 > Interface VE 23 is down, line protocol is down > vlan id: 0, vlan index: 0, ve type: 0 > members: none > active: none > IPv6 is enabled, link-local address is > Global unicast address(es): > Joined group address(es): > > Any ideas/hints how to configure dual-stack IPv6 on those boxes? The > Foundry documentation was not that helpful… > > Thanks, > Chris > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
