My bad. The chassis is running MLX code, obviously, and it's 05100c.
Any takers on why I'm not seeing the cam stats?
Thanks again.
On 5/12/2011 11:36 AM, Dave Peters wrote:
Hi all--
I've got a BI-RX-4 running the latest code, 2.703a, with an RX-BI24C
on it, and when I rconsole onto the blade to look at the cam
partition, I'm seeing zero entries, like so:
LP-1>show cam ip 24 stat
CAM IP statistics: free entries total entries
level1: 0 0
Did it because I was experiencing some dropped packets. A config
tweak seemed to fix that, but I feel like I should still see something
in the cam stats, since I've got traffic running through the card
continuously. Is there something I'm missing? Is this a software
bug, or am I using this command improperly?
Thanks much for your help.
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
--
Dave Peters
Technical Director
Terabit Systems
2565 3rd Street #218
San Francisco, CA 94107
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
