Hey Dave-- I'm not seeing any entries on an RX either. I suspect this command isn't supported, but I could be wrong. Can anyone else confirm that the show cam ip command works on an RX chassis?
--Chuck On Thu, May 12, 2011 at 11:36 AM, Dave Peters <[email protected]>wrote: > Hi all-- > > I've got a BI-RX-4 running the latest code, 2.703a, with an RX-BI24C on it, > and when I rconsole onto the blade to look at the cam partition, I'm seeing > zero entries, like so: > > LP-1>show cam ip 24 stat > CAM IP statistics: free entries total entries > level1: 0 0 > > Did it because I was experiencing some dropped packets. A config tweak > seemed to fix that, but I feel like I should still see something in the cam > stats, since I've got traffic running through the card continuously. Is > there something I'm missing? Is this a software bug, or am I using this > command improperly? > > Thanks much for your help. > > > > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
