Hi Frank, It seems on a XMR the CPU/MEM oids are returned (oh well only at 100) empty valued as you can see below:
06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1172] SNMP: v1: 193.138.X.X, dsname: CpuUtil, oid: .1.3.6.1.4.1.1991.1.1.2.11.1.1.6.1.1.300, value: 100 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1173] SNMP: v1: 193.138.X.X, dsname: CpuUtil, oid: .1.3.6.1.4.1.1991.1.1.2.11.1.1.6.5.1.300, value: 0 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1174] SNMP: v1: 193.138.X.X, dsname: CpuUtil, oid: .1.3.6.1.4.1.1991.1.1.2.11.1.1.6.6.1.300, value: 0 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1175] SNMP: v1: 193.138.X.X, dsname: MemTotal, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.24.1, value: U 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1175] SNMP: v1: 193.138.X.X, dsname: MemAvailable, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.25.1, value: U 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1176] SNMP: v1: 193.138.X.X, dsname: MemTotal, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.24.5, value: U 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1176] SNMP: v1: 193.138.X.X, dsname: MemAvailable, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.25.5, value: U 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1177] SNMP: v1: 193.138.X.X, dsname: MemTotal, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.24.6, value: U 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1177] SNMP: v1: 193.138.X.X, dsname: MemAvailable, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.25.6, value: U 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1178] SNMP: v1: 193.138.X.X, dsname: MemTotal, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.24.7, value: U 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1178] SNMP: v1: 193.138.X.X, dsname: MemAvailable, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.25.7, value: U 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1179] SNMP: v1: 193.138.X.X, dsname: MemTotal, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.24.8, value: U 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1179] SNMP: v1: 193.138.X.X, dsname: MemAvailable, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.25.8, value: U So on a MLX these fields are non-zeroed? Greets, Gerwin On 06/23/2011 01:21 AM, Frank Bulk wrote:
Gerwin: I needed to include the brocade_mlxe_counters.xml file. Here’s a new archive that contains all the files. If I have time this weekend I will work in making 95^th percentile graph templates. Frank *From:*Gerwin Krist -|- Digitalus Webhosting [mailto:[email protected]] *Sent:* Wednesday, June 22, 2011 10:41 AM *To:* [email protected] *Subject:* Re: [f-nsp] [cacti-user] Graphing Brocade MLXe (and MLX and XMR?) IPv4 and IPv6 interface counters in Cacti Hi Frank! I have some time to test your templates on our XMRs. It would be cool if you included the 95% templates too :-) Also when importing cacti_data_query_brocade_mlxe_-_interface_counters.xml i'm getting: [success]Interface - Brocade MLXe - IPv6 Traffic (bits/sec, Total Bandwidth) [update] + Found Dependency:(/Data Template Item/) RxOctetIPv6 + Found Dependency:(/CDEF/) Turn Bytes into Bits + Found Dependency:(/GPRINT Preset/) Normal + Unmet Dependency:(/Data Template Item/) + Found Dependency:(/Data Template Item/) TxOctetIPv6 + Unmet Dependency:(/Data Template Item/) [success]Interface - Brocade MLXe - IPv6 Packets [update] [success]Interface - Brocade MLXe - IPv4 Packets [update] [success]Interface - Brocade MLXe - IPv4 Traffic (bits/sec, Total Bandwidth) [update] [success]Interface - Brocade MLXe - Percentage IPv6 Traffic [update] Thanks for your help in advance! Greetz, Gerwin Krist On 05/17/2011 06:58 AM, Frank Bulk wrote: Yes, I can make those. 95^th percentile of input/output, or of the percentage IPv6? Frank *From:*[email protected] <mailto:[email protected]> [mailto:[email protected]] *On Behalf Of *Gerwin Krist -|- Digitalus Webhosting *Sent:* Monday, May 16, 2011 3:11 PM *To:* [email protected] <mailto:[email protected]> *Subject:* Re: [f-nsp] [cacti-user] Graphing Brocade MLXe (and MLX and XMR?) IPv4 and IPv6 interface counters in Cacti Hi Frank, Great stuff! When I have some spare time I will test it on our XMRs. Is it also possible to include 95% graphs? :-) On 05/12/2011 04:27 AM, Frank Bulk wrote: Attached are some templates I created and then exported from Cacti that draw on Brocade's private MIB that expose the MLXe's IPv4 and IPv6 counters on a per physical interface basis. This may be handy for those who want to create a baseline of IPv6 traffic before World IPv6 Day, both in term of absolute byte or packets, or in terms of percentage of traffic. (Not sure if the OIDs are supported on the MLX or XMR platforms and what software release it might need). These are the graphs: - IPv4 packets (in and out) - IPv6 packets (in and out) - IPv4 bytes (in and out) - IPv6 bytes (in and out) - percentage of bytes that are IPv6 They're 64-bit counters so it should work for higher-rate traffic. I think I've included all the relevant pieces by exporting from the Cacti GUI, but let me know if needed to include the brocade_mlxe_counters.xml file in resource/snmp_queries/. Kind regards, Frank ------------------------------------------------------------------------------ Achieve unprecedented app performance and reliability What every C/C++ and Fortran developer should know. Learn how Intel has extended the reach of its next-generation tools to help boost performance applications - inlcuding clusters. http://p.sf.net/sfu/intel-dev2devmay _______________________________________________ cacti-user mailing list [email protected] <mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/cacti-user _______________________________________________ foundry-nsp mailing list [email protected] <mailto:[email protected]> http://puck.nether.net/mailman/listinfo/foundry-nsp -- Met vriendelijke groet / With kind regards, Gerwin Krist Technical Manager Digitalus Webhosting First-class Internet Webhosting Web: http://www.digitalus.nl E-mail: gerwin at digitalus.nl Tel.: +31 (0) 598 630000 Fax: +31 (0) 598 631860 BOFH Wisdom: Collapsed Backbone *************************************************************************************** This message may contain information which is confidential or privileged. If you are not the intended recipient, please advise the sender immediately by reply e-mail and delete this message and any attachments without retaining a copy. *************************************************************************************** -- Met vriendelijke groet / With kind regards, Gerwin Krist Technical Manager Digitalus Webhosting First-class Internet Webhosting Web: http://www.digitalus.nl E-mail: gerwin at digitalus.nl Tel.: +31 (0) 598 630000 Fax: +31 (0) 598 631860 BOFH Wisdom: Collapsed Backbone *************************************************************************************** This message may contain information which is confidential or privileged. If you are not the intended recipient, please advise the sender immediately by reply e-mail and delete this message and any attachments without retaining a copy. ***************************************************************************************
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
