That's correct, they're non-zero on an MLX. Frank
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Gerwin Krist -|- Digitalus Webhosting & Webdesign Sent: Thursday, June 23, 2011 1:22 AM To: [email protected] Subject: Re: [f-nsp] [cacti-user] Graphing Brocade MLXe (and MLX and XMR?) IPv4 and IPv6 interface counters in Cacti Hi Frank, It seems on a XMR the CPU/MEM oids are returned (oh well only at 100) empty valued as you can see below: 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1172] SNMP: v1: 193.138.X.X, dsname: CpuUtil, oid: .1.3.6.1.4.1.1991.1.1.2.11.1.1.6.1.1.300, value: 100 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1173] SNMP: v1: 193.138.X.X, dsname: CpuUtil, oid: .1.3.6.1.4.1.1991.1.1.2.11.1.1.6.5.1.300, value: 0 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1174] SNMP: v1: 193.138.X.X, dsname: CpuUtil, oid: .1.3.6.1.4.1.1991.1.1.2.11.1.1.6.6.1.300, value: 0 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1175] SNMP: v1: 193.138.X.X, dsname: MemTotal, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.24.1, value: U 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1175] SNMP: v1: 193.138.X.X, dsname: MemAvailable, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.25.1, value: U 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1176] SNMP: v1: 193.138.X.X, dsname: MemTotal, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.24.5, value: U 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1176] SNMP: v1: 193.138.X.X, dsname: MemAvailable, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.25.5, value: U 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1177] SNMP: v1: 193.138.X.X, dsname: MemTotal, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.24.6, value: U 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1177] SNMP: v1: 193.138.X.X, dsname: MemAvailable, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.25.6, value: U 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1178] SNMP: v1: 193.138.X.X, dsname: MemTotal, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.24.7, value: U 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1178] SNMP: v1: 193.138.X.X, dsname: MemAvailable, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.25.7, value: U 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1179] SNMP: v1: 193.138.X.X, dsname: MemTotal, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.24.8, value: U 06/23/2011 08:12:38 AM - SPINE: Poller[0] Host[65] TH[1] DS[1179] SNMP: v1: 193.138.X.X, dsname: MemAvailable, oid: .1.3.6.1.4.1.1991.1.1.2.2.1.1.25.8, value: U So on a MLX these fields are non-zeroed? Greets, Gerwin On 06/23/2011 01:21 AM, Frank Bulk wrote: > Gerwin: > > I needed to include the brocade_mlxe_counters.xml file. Here's a new archive that contains all the files. > > If I have time this weekend I will work in making 95^th percentile graph templates. > > Frank > > *From:*Gerwin Krist -|- Digitalus Webhosting [mailto:[email protected]] > *Sent:* Wednesday, June 22, 2011 10:41 AM > *To:* [email protected] > *Subject:* Re: [f-nsp] [cacti-user] Graphing Brocade MLXe (and MLX and XMR?) IPv4 and IPv6 interface counters in Cacti > > Hi Frank! > > I have some time to test your templates on our XMRs. It would be cool if you included the 95% templates too :-) > > Also when importing cacti_data_query_brocade_mlxe_-_interface_counters.xml i'm getting: > > [success]Interface - Brocade MLXe - IPv6 Traffic (bits/sec, Total Bandwidth) [update] > + Found Dependency:(/Data Template Item/) RxOctetIPv6 > + Found Dependency:(/CDEF/) Turn Bytes into Bits > + Found Dependency:(/GPRINT Preset/) Normal > + Unmet Dependency:(/Data Template Item/) > + Found Dependency:(/Data Template Item/) TxOctetIPv6 > + Unmet Dependency:(/Data Template Item/) > [success]Interface - Brocade MLXe - IPv6 Packets [update] > [success]Interface - Brocade MLXe - IPv4 Packets [update] > [success]Interface - Brocade MLXe - IPv4 Traffic (bits/sec, Total Bandwidth) [update] > [success]Interface - Brocade MLXe - Percentage IPv6 Traffic [update] > > Thanks for your help in advance! > > Greetz, > Gerwin Krist > > > > On 05/17/2011 06:58 AM, Frank Bulk wrote: > > Yes, I can make those. 95^th percentile of input/output, or of the percentage IPv6? > > Frank > > *From:*[email protected] <mailto:[email protected]> [mailto:[email protected]] *On Behalf Of *Gerwin Krist -|- Digitalus Webhosting > *Sent:* Monday, May 16, 2011 3:11 PM > *To:* [email protected] <mailto:[email protected]> > *Subject:* Re: [f-nsp] [cacti-user] Graphing Brocade MLXe (and MLX and XMR?) IPv4 and IPv6 interface counters in Cacti > > Hi Frank, > > Great stuff! When I have some spare time I will test it on our XMRs. Is it also possible to include 95% graphs? :-) > > > On 05/12/2011 04:27 AM, Frank Bulk wrote: > > Attached are some templates I created and then exported from Cacti that draw > > on Brocade's private MIB that expose the MLXe's IPv4 and IPv6 counters on a > > per physical interface basis. This may be handy for those who want to > > create a baseline of IPv6 traffic before World IPv6 Day, both in term of > > absolute byte or packets, or in terms of percentage of traffic. (Not sure > > if the OIDs are supported on the MLX or XMR platforms and what software > > release it might need). > > > > These are the graphs: > > - IPv4 packets (in and out) > > - IPv6 packets (in and out) > > - IPv4 bytes (in and out) > > - IPv6 bytes (in and out) > > - percentage of bytes that are IPv6 > > > > They're 64-bit counters so it should work for higher-rate traffic. > > > > I think I've included all the relevant pieces by exporting from the Cacti > > GUI, but let me know if needed to include the brocade_mlxe_counters.xml file > > in resource/snmp_queries/. > > > > Kind regards, > > > > Frank > > > > > > ---------------------------------------------------------------------------- -- > > Achieve unprecedented app performance and reliability > > What every C/C++ and Fortran developer should know. > > Learn how Intel has extended the reach of its next-generation tools > > to help boost performance applications - inlcuding clusters. > > http://p.sf.net/sfu/intel-dev2devmay > > > > > > _______________________________________________ > > cacti-user mailing list > > [email protected] <mailto:[email protected]> > > https://lists.sourceforge.net/lists/listinfo/cacti-user > > > > > > _______________________________________________ > > foundry-nsp mailing list > > [email protected] <mailto:[email protected]> > > http://puck.nether.net/mailman/listinfo/foundry-nsp > > > > > > -- > > > > Met vriendelijke groet / With kind regards, > > > > Gerwin Krist > > Technical Manager > > > > Digitalus Webhosting > > First-class Internet Webhosting > > > > Web: http://www.digitalus.nl > > E-mail: gerwin at digitalus.nl > > Tel.: +31 (0) 598 630000 > > Fax: +31 (0) 598 631860 > > > > BOFH Wisdom: > > Collapsed Backbone > > > > **************************************************************************** *********** > > This message may contain information which is confidential or privileged. If you are > > not the intended recipient, please advise the sender immediately by reply e-mail and > > delete this message and any attachments without retaining a copy. > > **************************************************************************** *********** > > > > > -- > > > > Met vriendelijke groet / With kind regards, > > > > Gerwin Krist > > Technical Manager > > > > Digitalus Webhosting > > First-class Internet Webhosting > > > > Web: http://www.digitalus.nl > > E-mail: gerwin at digitalus.nl > > Tel.: +31 (0) 598 630000 > > Fax: +31 (0) 598 631860 > > > > BOFH Wisdom: > > Collapsed Backbone > > > > **************************************************************************** *********** > > This message may contain information which is confidential or privileged. If you are > > not the intended recipient, please advise the sender immediately by reply e-mail and > > delete this message and any attachments without retaining a copy. > > **************************************************************************** *********** _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
