Dear list, At first, excuse my ignorance. I'm trying to get used to configuring MPLS on Brocade MLX/XMR series and all is working fine, but after reading through the manual i still have a question that is unanswered at the moment. We are operating a network of 4 XMR routers in a ring topology with routed interfaces pointing to each-other. On these interfaces, i enabled ldp as follows :
router mpls policy traffic-eng ospf mpls-interface ve9 ldp-enable mpls-interface ve92 ldp-enable ! Local, and remote VLL's are working perfectly. The manual is referring to configuring LSP's which you then use in the VPLS or VLL configuration to determine your path (vpls). I never used that before and it still is working. What is the actual advantage of configuring LSP's and using them in your VLL or VPLS configuration? I don't seem to understand it fully. If someone can explain it in a more basic way, i'd be very grateful. Kind regards, Remco Bressers _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
