Hello all, I'm having a strange issue when I try to telnet into a few of my foundry switches. The switches will refuse the connections.
I originally had this issue with two 4802s. I thought the problem was due to bad switchs but then the issue popped up on an MG8 and an RX4. If I stop and restart the telnet service from the console they will accept telnet connections for about 5 minutes, then start refusing them again. show telnet shows no active sessions and the CPUs are not overloaded. Logs are clear. Has anyone experienced this before and knows a solution? Is this a known issue I need to look out for? Any advise is appreciated. Aaron _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
