Thanks for the reply. Yes. They reply to pings and forward traffic just fine. SNMP and SFLOW still work also.
Aaron > Do the switches reply to pings? > > > On 05/29/2012 09:31 PM, [email protected] wrote: >> Hello all, >> >> I'm having a strange issue when I try to telnet into a few of my foundry >> switches. The switches will refuse the connections. >> >> I originally had this issue with two 4802s. I thought the problem was >> due >> to bad switchs but then the issue popped up on an MG8 and an RX4. >> >> If I stop and restart the telnet service from the console they will >> accept >> telnet connections for about 5 minutes, then start refusing them again. >> show telnet shows no active sessions and the CPUs are not overloaded. >> Logs >> are clear. >> >> Has anyone experienced this before and knows a solution? Is this a >> known >> issue I need to look out for? Any advise is appreciated. >> >> Aaron >> >> _______________________________________________ >> foundry-nsp mailing list >> [email protected] >> http://puck.nether.net/mailman/listinfo/foundry-nsp > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
