Hi
Le 21/08/2012 22:24, chip a écrit :
Hi all,
I have a situation in which I'd like to encapsulate packets coming
in on an 802.1q sub int on a Cisco 7600 and drop them into a VLAN on a
Brocade XMR. The two routers are in two different ASNs and do not
have an IGP. The two routers are directly connected to each other and
only speak via eBGP. I've got the "send-label" on the cisco side
and "next-hop-mpls" on the brocade side. It appears that I have and
LDP session but I'm not seeing labels and the
vll/xconnect/vc/pseudowire isn't up. The interface e1/1 on the
brocade side is a trunked port going down to other distribution
switches and eventually a server that sits in vlan 3000. I apologize
for my ignorance here, still learning all the moving pieces.
The answer is in your debug messages:
> [email protected]#sho mpls vll detail
> VLL b1_tsr1, VC-ID 100, VLL-INDEX 0
>
> End-point : tagged vlan 3000 e 1/1
> End-Point state : Up
> MCT state : None
> IFL-ID : --
> Local VC type : tag
> Local VC MTU : 1500
> COS : --
> Extended Counters: Enabled
>
> Vll-Peer : 10.100.119.134
> State : DOWN - no tunnel LSP to vll-peer
--> You need an LSP to be up and running between the two routers. (actually too,
one in each way)
Have you even bother reading the brocade docs ?
(hint:
http://www.brocade.com/downloads/documents/product_manuals/B_NetIron/NetIronUnified_05300a_ConfigGuide.pdf
)
--
RD
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
