Josh,
I was told that the WAN link needs to be "tagged"? (a bit backwards from Cisco) or included in a VLAN so we put it into VLAN 2 Should a) The VLAN access ports be separate from this port? So a vlan 3 for all the other ports? b) Should we not "tag" the port so that one is not in a vlan then my access ports are in a vlan? Thank you in advance, Eric On 2012-09-05 05:48, Josh Farrelly wrote: > Have you checked with the provider whether they expect you to tag your frames toward them, or whether they are expecting them to arrive untagged? > If you're tagging the traffic and they're expecting to it arrive natively, or vice versa, the frames will (probably) be discarded. > Regards, > Josh Farrelly > Infrastructure Architect > Manukau Institute of Technology > From: Eric Chen <[email protected] [1]> > Date: Wednesday, 5 September 2012 8:08 AM > To: "[email protected] [2]" <[email protected] [3]> > Cc: "[email protected] [4]" <[email protected] [5]> > Subject: [f-nsp] Help with setting up a Brocade FESX448 - PREM > > Hi, > > We're looking to setup a Brocade FESX448 - PREM. We have 2 drops from our provider and have plugged them into ports 1 and 2. I've created a vlan 2 and a ve 1 and tagged the ports 1 and 2 to vlan 2 and created spanning tree. But the ports simply will not ping from the external IP … any ideas? > > If anyone has a walkthrough / step-by-step of setup, it'd be much appreciated > > Thank you, > > Eric Links: ------ [1] mailto:[email protected] [2] mailto:[email protected] [3] mailto:[email protected] [4] mailto:[email protected] [5] mailto:[email protected]
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
