All - below is the config output - we have 2 gigabit uplinks from provider. I've done the below but for some reason am not about to ping out .
Also if I want a separate private VLAN with its own IPs - how do we set that up? I assume just (vlan 3, router-interface 3, int ve 3 and then add IPs? Do we need to route it?) show config ! Startup-config data location is flash memory ! Startup configuration: ! ver 07.2.02fT3e3 ! ! ! ! vlan 1 name DEFAULT-VLAN by port ! vlan 2 by port untagged ethe 1 to 48 router-interface ve 2 ! ! ! ! ! ! ! ip route 0.0.0.0 0.0.0.0 PROVIDER GATEWAT Thank you, Eric From: [email protected] [mailto:[email protected]] On Behalf Of Eric Chen Sent: Wednesday, September 05, 2012 4:08 AM To: [email protected] Cc: [email protected] Subject: [f-nsp] Help with setting up a Brocade FESX448 - PREM Hi, We're looking to setup a Brocade FESX448 - PREM. We have 2 drops from our provider and have plugged them into ports 1 and 2. I've created a vlan 2 and a ve 1 and tagged the ports 1 and 2 to vlan 2 and created spanning tree. But the ports simply will not ping from the external IP . any ideas? If anyone has a walkthrough / step-by-step of setup, it'd be much appreciated Thank you, Eric
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
