I haven't seen this problem before on my MLXe chassis. If you have a second management module, run "switchover" and then re-seat the malfunctioning module. Otherwise, the "reset" command or re-seating the malfunctioning module should work without rebooting the chassis.
On Fri, Jan 18, 2013 at 3:07 AM, Alexander Shikoff <[email protected]> wrote: > Hello! > > This morning my Brocade MLXe-16 with BR-MLX-MR2-M Management Module > (sofware version is NetIron 5.02b) stopped responding telnet and SNMP > requests. > > Management interface replies to ICMP echo request though. > I thought it might be memory leak but there is enough memory: > ==================================================================== > NetIron MLX active MP slot 33: > Total SDRAM : 2147483648 bytes > Available Memory : 1857908736 bytes > Available Memory (%): 86 percent > Free Physical Pages : 443649 pages > > Malloc statistics: total 6912475 > OS malloc count: 59728132 > OS malloc fail: 0 > OS free count: 59717863 > OS free fail: 0 > diff: 10269 > > Has anyone expirienced such problem ? > I need to fix it without chassis reboot. If I issue "reset" CLI > command will line cards stay functioning properly? > > Thanks in advance. > > -- > MINO-RIPE > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
