Hi, On Fri, Jan 18, 2013 at 07:41:23AM -0700, Matt Kassawara wrote: > I haven't seen this problem before on my MLXe chassis. If you have a > second management module, run "switchover" and then re-seat the > malfunctioning module. Otherwise, the "reset" command or re-seating > the malfunctioning module should work without rebooting the chassis. It's too late... :( After issuing 'show chassis' command Management Module totally hung. We opened TAC case, but I'm afraid that physical removing and insertion it back is the only way. :( > On Fri, Jan 18, 2013 at 3:07 AM, Alexander Shikoff > <[email protected]> wrote: > > Hello! > > > > This morning my Brocade MLXe-16 with BR-MLX-MR2-M Management Module > > (sofware version is NetIron 5.02b) stopped responding telnet and SNMP > > requests. > > > > Management interface replies to ICMP echo request though. > > I thought it might be memory leak but there is enough memory: > > ==================================================================== > > NetIron MLX active MP slot 33: > > Total SDRAM : 2147483648 bytes > > Available Memory : 1857908736 bytes > > Available Memory (%): 86 percent > > Free Physical Pages : 443649 pages > > > > Malloc statistics: total 6912475 > > OS malloc count: 59728132 > > OS malloc fail: 0 > > OS free count: 59717863 > > OS free fail: 0 > > diff: 10269 > > > > Has anyone expirienced such problem ? > > I need to fix it without chassis reboot. If I issue "reset" CLI > > command will line cards stay functioning properly? > > > > Thanks in advance. > > > > -- > > MINO-RIPE > > _______________________________________________ > > foundry-nsp mailing list > > [email protected] > > http://puck.nether.net/mailman/listinfo/foundry-nsp
-- MINO-RIPE _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
