Hi all, i'm trying to set up a rate limiting for all UDP traffic on a VE interface on a MLXe using Ironware 5.3.0b. The VE interface is only used on a physical port/the VLAN is only configured on a single port - but there are some other vlans also using the same port so i can't move the interface to a route-only config that easy. It looks like it is not possible to set up a ACL based rate limit on a VE interface. Instead using a VLAN-based rate limit it seems that it is not possible to use this together with a ACL for matching only UDP traffic.
Any ideas/workarounds for this case? Thanks, -chris _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
