* [email protected] (Chris Hellkvist) [Mon 18 Mar 2013, 17:44 CET]:
i'm trying to set up a rate limiting for all UDP traffic on a VE
interface on a MLXe using Ironware 5.3.0b. The VE interface is only
used on a physical port/the VLAN is only configured on a single port -
but there are some other vlans also using the same port so i can't
move the interface to a route-only config that easy.
It looks like it is not possible to set up a ACL based rate limit on a
VE interface. Instead using a VLAN-based rate limit it seems that it
is not possible to use this together with a ACL for matching only UDP
traffic.
You can use an ACL-based rate-limit on the physical interface,
depending on whether you know what IP subnets are in use behind the
ve you wish to limit traffic from/to.
-- Niels.
--
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
