Howdy, I setup a 2 port link-aggregation between an ICX 6450 and a Dell PowerEdge R620 running Linux.
I configured both sides to use lacp. Is there something I need to do to get load balancing? It seems like by default it is using port 1/1/40 for incoming traffic and port 1/1/41 for outbound traffic. I would like there to be load sharing on the ports. Is this something configurable on the ICX, on the server, or perhaps both? Thanks, -Drew
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
