#reload-check Checking for coherence... Done. Reload-check is fine.
The line card is showing the right code version. The only difference is that this card was put into this system at a later date. Before the card was put into the system I had upgraded the card itself to the right code version in another XMR. How do I check the boot log of a line card? It would be good to look at that. > Date: Wed, 24 Jul 2013 12:01:52 +0200 > From: [email protected] > To: [email protected] > Subject: Re: [f-nsp] XMR LP running out of RAM > > Hi, > > This sounds strange to me too. I guess you allready did a > 'reload-check'. Could you do a 'show version' to check the versions on > the LP cards (hardware and software). Cause I had once some strange > issues after I upgraded a linecard directly from 2.4 -> 5.1. > > LP1 (the one which is affected) and LP2 (the one which is ok) > > Next thing what you can do is boot the lp in interactive mode an look > into the boot process if you see something weired (missmatch of monitor > or boot code). > > Regards > Erich
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
