Just be sure to set the boot variable for the MP and LPs to the new code and write mem. Since FPGAs don't have primary/secondary, if the box (for whatever reason) happens to reboot, you'll want the software to boot the version that's compatible with the FPGAs you have primed.
/Ryan Ryan Harden Senior Network Engineer University of Chicago - AS160 P: 773-834-5441 On Jul 29, 2013, at 1:25 PM, Josh Galvez <[email protected]> wrote: > I'm upgrading from 5.1 to 5.4 and I would like to perform the upgrade > procedure and load the code on my XMR's several hours or even a day or two > before I actually perform the reload to start running this new code. That > way instead of the 20 minute long TFTP process at midnight, I have just the 2 > minute reload. > > Has anyone had any problems or concerns doing this? > > -Josh > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp
signature.asc
Description: Message signed with OpenPGP using GPGMail
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
