I've been burned too many times over the years with products where uploading/copying code shouldn't have caused a problem, but did. Unless I'm willing to accept a service interruption, I now upload/copy code during the maintenance window, or a day before.
Frank From: foundry-nsp [mailto:[email protected]] On Behalf Of Darren O'Connor Sent: Monday, July 29, 2013 1:58 PM To: Josh Galvez; [email protected] Subject: Re: [f-nsp] Loading code on XMR before reload I've had an issue in the past where BFD sessions flapped when uploading the fpga code. Another time it didn't. YMMV _____ Date: Mon, 29 Jul 2013 12:25:27 -0600 From: [email protected] <mailto:[email protected]> To: [email protected] <mailto:[email protected]> Subject: [f-nsp] Loading code on XMR before reload I'm upgrading from 5.1 to 5.4 and I would like to perform the upgrade procedure and load the code on my XMR's several hours or even a day or two before I actually perform the reload to start running this new code. That way instead of the 20 minute long TFTP process at midnight, I have just the 2 minute reload. Has anyone had any problems or concerns doing this? -Josh _______________________________________________ foundry-nsp mailing list [email protected] <mailto:[email protected]> http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
