"show proc cpu" is limited to router code as far as I am aware. It's like that in the FES code as well. You could alter your config to allow management and load router code to see which process is causing the issue, but in some cases the process causing the issue may not be in the list(like if it is related to management processes).
If the problem is due to high pps of a specific type of traffic you may be better off using dm raw. Dm raw max 50 Dm raw mode br Dm raw If you haven't ruled out loops of one kind or another I would do that first. --JK -----Original Message----- From: foundry-nsp [mailto:[email protected]] On Behalf Of "Rolf Hanßen" Sent: Thursday, April 17, 2014 10:25 AM To: [email protected] Subject: [f-nsp] Show processes on a FESX Hi, I am wondering how to get a processlist on a FESX. Had a box with strange load and wanted to look what is causing it. "show cpu-utilization" lists only the total utilization and there is also no "show proc cpu" or similar that sounds to me like what I look for. I found some "show tech-support cpu" in the manuals but this is not available. sh version: SW: Version 07.2.00aT3e1 Copyright (c) 1996-2010 Brocade Communications Systems, Inc. Compiled on Nov 10 2010 at 19:22:15 labeled as SXS07200a (2992228 bytes) Primary SXS07200a.bin BootROM: Version 07.2.00T3e5 (FEv2) HW: Stackable FESX424HF+2XG ========================================================================== Serial #: xxxxxxxxx License: BASE_SOFT_PACKAGE (LID: hnFHFMHILI) P-ASIC 0: type 00D1, rev D2 subrev 00 P-ASIC 1: type 00D1, rev D2 subrev 00 P-ASIC 2: type 01D1, rev 00 subrev 00 P-ASIC 3: type 01D1, rev 00 subrev 00 ========================================================================== 333 MHz Power PC processor 8245 (version 129/1014) 66 MHz bus 512 KB boot flash memory 16384 KB code flash memory 128 MB DRAM The system uptime is 1092 days 14 hours 11 minutes 15 seconds The system started at 00:56:12 GMT+01 Thu Apr 21 2011 The system : started=warm start reloaded=by "reload" Afaik that is one of the last supported releases for that hardware. kind regards Rolf _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
