* [email protected] (Kennedy, Joseph) [Thu 17 Apr 2014, 18:50 CEST]:
"show proc cpu" is limited to router code as far as I am aware. It's
like that in the FES code as well. You could alter your config to
allow management and load router code to see which process is
causing the issue, but in some cases the process causing the issue
may not be in the list(like if it is related to management
processes).
Don't do that without console access. The configuration statement
style for setting the switch's management IP address in switch
software is not accepted as valid in the router software.
Chances are a reload will clear this up anyway. FES/FESX in my
experience can run into problems much like this near the 1,000 days
uptime mark. :)
-- Niels.
--
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
