Hi Looks like you have "route-only" globally or on physical port applied. Try to do "no route-only" on physical port first.
Valeri Streltsov -----Original Message----- From: foundry-nsp [mailto:[email protected]] On Behalf Of Franz Georg Kohler Sent: Tuesday, March 1, 2016 11:53 AM To: [email protected] Subject: [f-nsp] Double-switched (looped) traffic on Netiron MLX Hello, I am currently seing traffic being blocked on a MLX setup where there are two VLANS: First vlan (10 in this example) is a vlan with layer-3 ve interface. Traffic is first sent via the internal VLAN to a firewall device. Then it is switched using the external VLAN and finally being routed. This is to make the traffic pass the firewall and not to switch it directly to the server, bypassing the firewall. With this setup, MLX does not switch the traffic correctly until i set transparent-hw-flooding on the internal VLAN. ARP works but IP packets do not get forwarded. Does anybody know why this is the case and if ther is any solution apart from setting transparent-hw-flooding? +-------+ | | +-----------+ | ICX2 +---------------+ Server | +------------+ | +-----------+ | +-------+ | +-------+ | | +-+ | MLX | VLAN 999 | +------------------+ +-------+ | VLAN10/ve10 | | +---+-------+ | | | | | firewall | +------------------+ | +-----------+ Best regards, Franz Georg Köhler _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
