Dear Nick,

You should probably take a look at Brocade's recommended Target path versions.

Personnally, I have been running multiple stacks of FCX-648S as pure L2 switchs 
using FCXS 740b with no issues.

I can't comment on broadcast storm control as I don't use it.

Hope this helps.

Best regards.



> Le 24 mai 2016 à 19:57, Nick Cutting <[email protected]> a écrit :
> 
> Any recommendations for a layer 2 image on
> 
> FCX-48G 48-port labeled as FCXS07202
>  
> And a layer 3 image on
>  
> TurboIron-X24  labeled as TIR04200c
>  
> I have a large outage window and want to upgrade to a newer version.
>  
> Also – anyone see any issues with enabling some kind of broadcast storm 
> control for these types of devices?
>  
> The documentation was 4 lines long without any configuration examples.  It 
> just mentioned its per-port.
>  
>  
>  
> Nick Cutting | Network Engineer | Architecture & Standards Team| Office: 
> 203-742-7856 | Fax: 203-742-7890
>  
> <image001.png>
>  
> _______________________________________________
> foundry-nsp mailing list
> [email protected]
> http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp

Reply via email to