Current TP for FastIron(FCX/ICX) can be found here: http://www.brocade.com/en/backend-content/pdf-page.html?/content/dam/common/documents/content-types/target-path-selection-guide/brocade-fi-target-path.pdf
TurboIron is pretty long in the tooth but will support up to 8.0.01 code. That said, the 7.4 train is extremely stable at this point in its life, there may be more options for storm control in the later versions. I have also had pretty good results with 8.0.30, but mostly on ICX, limited FCX exposure. Mike On Tue, May 24, 2016 at 11:04 AM, Youssef Bengelloun-Zahr <[email protected]> wrote: > Dear Nick, > > You should probably take a look at Brocade's recommended Target path > versions. > > Personnally, I have been running multiple stacks of FCX-648S as pure L2 > switchs using FCXS 740b with no issues. > > I can't comment on broadcast storm control as I don't use it. > > Hope this helps. > > Best regards. > > > > Le 24 mai 2016 à 19:57, Nick Cutting <[email protected]> a écrit : > > Any recommendations for a layer 2 image on > > FCX-48G 48-port labeled as FCXS07202 > > > > And a layer 3 image on > > > > TurboIron-X24 labeled as TIR04200c > > > > I have a large outage window and want to upgrade to a newer version. > > > > Also – anyone see any issues with enabling some kind of broadcast storm > control for these types of devices? > > > > The documentation was 4 lines long without any configuration examples. It > just mentioned its per-port. > > > > > > > > *Nick Cutting* | Network Engineer | Architecture & Standards Team| > Office: 203-742-7856 | Fax: 203-742-7890 > > > > <image001.png> > > > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
