Thx Clement for this advice, did you mean something like this: ! int eth 1/2 enable route-only ip addres 10.0.0.1/14 ! vlan 666 name dummy-layer3-vlan untag eth 2/12 !
Gerald Am 24.06.2016 um 21:59 schrieb Clement Cavadore: > You should create some "dummy" vlans on route-only ports, to avoid that. > No problem having untagged vlan on any port with IP/routing configuration. > You even ca do this without any disturbance. > > Le 24 juin 2016 21:53:08 GMT+02:00, Gerald <[email protected]> a écrit : >> The MLX got a reboot some weeks ago, this seems not to help. I'am >> afraid >> of your (1) note... :-(. >> >> Gerald >> >> Am 24.06.2016 um 21:27 schrieb Steven Raymond: >>> >>>> On Jun 24, 2016, at 1:19 PM, Gerald <[email protected]> wrote: >>>> >>>> Is there a way to stop this? I would have my "route-only" ports >> Layer2 >>>> free and not disturb other Layer2 systems behind. >>> >>> Old old notes I found said basically 1) “bpdus are sent even with >> route-only”, and 2) "you should reboot after applying route-only". >>> >>> Both of which may not helpful to you. >>> >>> >>> >> _______________________________________________ >> foundry-nsp mailing list >> [email protected] >> http://puck.nether.net/mailman/listinfo/foundry-nsp > _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
