My gotcha is that I have a default router and I want to use it against ve's.
Frank -----Original Message----- From: Jörg Kost [mailto:[email protected]] Sent: Saturday, July 16, 2016 2:48 AM To: [email protected] Cc: Michael Gehrmann <[email protected]>; [email protected] Subject: Re: [f-nsp] MLX and uRPF for RTBH Hi, ipv4-ipv6-2 and multi-service-4 are supported profiles. For my network I always lock down the individual physical ports facing customers to strict modes, while keeping IX-ports loose and core-ports without any. Regards Jörg Kost On 15 Jul 2016, at 4:32, [email protected] wrote: > My own research on MLX support for uRPF made me very disappointed: > > > > Note this from the release notes: > > - If a default route is present on the router, loose mode > will permit all traffic > > - RPF can only be configured at the physical port level. It > should not be configured on virtual interfaces on the Brocade MLX > series and Brocade NetIron XMR. > > o Brocade MLX series and Brocade NetIron XMR devices do not support > uRPF for VE interfaces. > > Also RPF is not compatible with this CAM profile: “ipv4-ipv6” I > think we’re using that one. > > https://tnotez.files.wordpress.com/2013/05/netironunified_05400a_configguide.pdf > > > > Frank > _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
