Let's see how we go. Working great at the moment.

Thanks all for your feedback.

Mike

On 13 July 2016 at 17:04, Takahiro Masuda <[email protected]> wrote:

> I use this but sometimes during dos attacks it takes a toll on the lp cpu
> and have to remove it.
>
> ------------------------------
>
> *From: *"Michael Gehrmann" <[email protected]>
> *To: *[email protected]
> *Sent: *Tuesday, July 12, 2016 10:11:15 PM
> *Subject: *[f-nsp] MLX and uRPF for RTBH
>
> Hi All,
> Wondering if anyone has used the uRPF feature on MLX to have the source
> address of traffic matched to null0 routes?
>
> My reading so far has lead me to a config like this:
>
> reverse-path-check
> urpf-exclude-default
> !interface eth1/1
> rpf-mode loose log
>
> !
>
>
> Example routes look like this:
>
> device#sh ip route 2.144.0.0/24
>         Destination        Gateway         Port          Cost
>  Type Uptime src-vrf
> 1       2.144.0.0/24       DIRECT          drop          20/0          Be
>   3d1h   -
>
> My next step is the lab.
>
> Cheers
> --
> Michael Gehrmann
>
> _______________________________________________
> foundry-nsp mailing list
> [email protected]
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
>


-- 
Michael Gehrmann
Senior Network Engineer - Atlassian
m: +61 407 570 658
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp

Reply via email to