I tried finally to use the phrozen patch and installed a new images. other errors but with the same theme :)
//John Jan 1 00:02:21 axis-00408c012078 kernel: 8:0:0:0: scsi: Device offlined - not ready after error recovery Jan 1 00:02:21 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:02:21 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:02:21 axis-00408c012078 kernel: usb 1-2: new full speed USB device using hc-crisv10 and address 11 Jan 1 00:02:21 axis-00408c012078 kernel: scsi9 : SCSI emulation for USB Mass Storage devices Jan 1 00:02:33 axis-00408c012078 kernel: usb 1-2: reset full speed USB device using hc-crisv10 and address 11 Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b8a0[184] Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b8a0[185] Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b8a0[186] Jan 1 00:02:33 axis-00408c012078 kernel: usb 1-2: device descriptor read/64, error -71 Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b8a0[187] Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b8a0[188] Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b8a0[189] Jan 1 00:02:33 axis-00408c012078 kernel: usb 1-2: device descriptor read/64, error -71 Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:02:34 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad? Jan 1 00:02:34 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:02:34 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:02:34 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:02:34 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:02:35 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad? Jan 1 00:02:35 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:02:35 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:02:35 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:02:35 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:02:36 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad? Jan 1 00:02:36 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:02:36 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:02:36 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:02:36 axis-00408c012078 kernel: usb 1-2: USB disconnect, address 11 Jan 1 00:02:36 axis-00408c012078 kernel: 9:0:0:0: scsi: Device offlined - not ready after error recovery Jan 1 00:02:37 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:02:37 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:02:37 axis-00408c012078 kernel: usb 1-2: new full speed USB device using hc-crisv10 and address 12 Jan 1 00:02:37 axis-00408c012078 kernel: scsi10 : SCSI emulation for USB Mass Storage devices Jan 1 00:02:48 axis-00408c012078 kernel: usb 1-2: reset full speed USB device using hc-crisv10 and address 12 Jan 1 00:02:48 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b8a0[203] Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b8a0[204] Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b8a0[205] Jan 1 00:02:49 axis-00408c012078 kernel: usb 1-2: device descriptor read/64, error -71 Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b8a0[206] Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b8a0[207] Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b8a0[208] Jan 1 00:02:49 axis-00408c012078 kernel: usb 1-2: device descriptor read/64, error -71 Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:02:50 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad? Jan 1 00:02:50 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:02:50 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:02:50 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:02:50 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:02:51 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad? Jan 1 00:02:51 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:02:51 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:02:51 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:02:51 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:02:52 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad? Jan 1 00:02:52 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:02:52 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:02:52 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:02:52 axis-00408c012078 kernel: usb 1-2: USB disconnect, address 12 Jan 1 00:02:52 axis-00408c012078 kernel: 10:0:0:0: scsi: Device offlined - not ready after error recovery Jan 1 00:02:52 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:02:52 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:02:52 axis-00408c012078 kernel: usb 1-2: new full speed USB device using hc-crisv10 and address 13 Jan 1 00:02:52 axis-00408c012078 kernel: scsi11 : SCSI emulation for USB Mass Storage devices Jan 1 00:03:04 axis-00408c012078 kernel: usb 1-2: reset full speed USB device using hc-crisv10 and address 13 Jan 1 00:03:04 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b840[222] Jan 1 00:03:04 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b840[223] Jan 1 00:03:04 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b840[224] Jan 1 00:03:04 axis-00408c012078 kernel: usb 1-2: device descriptor read/64, error -71 Jan 1 00:03:04 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b840[225] Jan 1 00:03:04 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b840[226] Jan 1 00:03:04 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b840[227] Jan 1 00:03:05 axis-00408c012078 kernel: usb 1-2: device descriptor read/64, error -71 Jan 1 00:03:05 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:03:05 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:03:05 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:03:05 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:03:06 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad? Jan 1 00:03:06 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:03:06 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:03:06 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:03:06 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:03:07 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad? Jan 1 00:03:07 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:03:07 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:03:07 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:03:07 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:03:08 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad? Jan 1 00:03:08 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:03:08 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:03:08 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:03:08 axis-00408c012078 kernel: usb 1-2: USB disconnect, address 13 Jan 1 00:03:08 axis-00408c012078 kernel: 11:0:0:0: scsi: Device offlined - not ready after error recovery Jan 1 00:03:08 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:03:08 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:03:08 axis-00408c012078 kernel: usb 1-2: new full speed USB device using hc-crisv10 and address 14 Jan 1 00:03:08 axis-00408c012078 kernel: scsi12 : SCSI emulation for USB Mass Storage devices Jan 1 00:03:20 axis-00408c012078 kernel: usb 1-2: reset full speed USB device using hc-crisv10 and address 14 Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b8a0[241] Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b8a0[242] Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b8a0[243] Jan 1 00:03:20 axis-00408c012078 kernel: usb 1-2: device descriptor read/64, error -71 Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b8a0[244] Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b8a0[245] Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b8a0[246] Jan 1 00:03:20 axis-00408c012078 kernel: usb 1-2: device descriptor read/64, error -71 Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:03:21 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad? Jan 1 00:03:21 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:03:21 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:03:21 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:03:21 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:03:22 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad? Jan 1 00:03:22 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:03:22 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:03:22 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:03:22 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:03:23 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad? Jan 1 00:03:23 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:03:23 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:03:23 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:03:23 axis-00408c012078 kernel: usb 1-2: USB disconnect, address 14 Jan 1 00:03:23 axis-00408c012078 kernel: 12:0:0:0: scsi: Device offlined - not ready after error recovery Jan 1 00:03:23 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:03:23 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:03:23 axis-00408c012078 kernel: usb 1-2: new full speed USB device using hc-crisv10 and address 15 Jan 1 00:03:24 axis-00408c012078 kernel: scsi13 : SCSI emulation for USB Mass Storage devices Jan 1 00:03:35 axis-00408c012078 kernel: usb 1-2: reset full speed USB device using hc-crisv10 and address 15 Jan 1 00:03:35 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b840[260] Jan 1 00:03:35 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b840[261] Jan 1 00:03:35 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b840[262] Jan 1 00:03:35 axis-00408c012078 kernel: usb 1-2: device descriptor read/64, error -71 Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b840[263] Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b840[264] Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_irq warn: 3rd error for epid:0 (in ctrl) URB:0xc045b840[265] Jan 1 00:03:36 axis-00408c012078 kernel: usb 1-2: device descriptor read/64, error -71 Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:03:37 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad? Jan 1 00:03:37 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:03:37 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:03:37 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:03:37 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running Jan 1 00:03:38 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad? Jan 1 00:03:38 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode Jan 1 00:03:38 axis-00408c012078 kernel: crisv10_rh: Physical port 2 disabled Jan 1 00:03:38 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started Jan 1 00:03:38 axis-00408c012078 kernel: crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running --- In [email protected], "mailinglistrecipient" <[EMAIL PROTECTED]> wrote: > > Hi again, > > I have now tried with kernel 2.6, I dump the /var/log/messages below. > It didn't get better anyway. > The USB HDD is powerd via the USB bus itself. Let's say the > powersupply isn't capable of delivering the power needed, could > behaviours like this occure? Or wouldn't the HDD even power up if the > power isn't sufficient? > > > //John > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/foxboard/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/foxboard/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
