Re: [foxboard] Re: Unable to connect USB mass storage device

[John Gunnarsson]

I found what the error was. Somehow the disc didn't get the power needed from the foxboard. When i provide external power to the disk i started to work!
On my laptop with ubuntu the disc just works fine (gets automatically mounted) so the power from the laptop is sufficient to power it.
However the problem is now solved.

//John

On 11/4/06, John <[EMAIL PROTECTED]> wrote:

What happens if you plug the usb disc into a normal linux box ?

mailinglistrecipient schrieb:

> I tried finally to use the phrozen patch and installed a new images.
> other errors but with the same theme :)
>
> //John
>
> Jan 1 00:02:21 axis-00408c012078 kernel: 8:0:0:0: scsi: Device
> offlined - not ready after error recovery
> Jan 1 00:02:21 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:02:21 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:02:21 axis-00408c012078 kernel: usb 1-2: new full speed USB
> device using hc-crisv10 and address 11
> Jan 1 00:02:21 axis-00408c012078 kernel: scsi9 : SCSI emulation for
> USB Mass Storage devices
> Jan 1 00:02:33 axis-00408c012078 kernel: usb 1-2: reset full speed
> USB device using hc-crisv10 and address 11
> Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b8a0[184]
> Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b8a0[185]
> Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b8a0[186]
> Jan 1 00:02:33 axis-00408c012078 kernel: usb 1-2: device descriptor
> read/64, error -71
> Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b8a0[187]
> Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b8a0[188]
> Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b8a0[189]
> Jan 1 00:02:33 axis-00408c012078 kernel: usb 1-2: device descriptor
> read/64, error -71
> Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:02:34 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable
> port 2. Maybe the USB cable is bad?
> Jan 1 00:02:34 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:02:34 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:02:34 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:02:34 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:02:35 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable
> port 2. Maybe the USB cable is bad?
> Jan 1 00:02:35 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:02:35 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:02:35 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:02:35 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:02:36 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable
> port 2. Maybe the USB cable is bad?
> Jan 1 00:02:36 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:02:36 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:02:36 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:02:36 axis-00408c012078 kernel: usb 1-2: USB disconnect,
> address 11
> Jan 1 00:02:36 axis-00408c012078 kernel: 9:0:0:0: scsi: Device
> offlined - not ready after error recovery
> Jan 1 00:02:37 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:02:37 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:02:37 axis-00408c012078 kernel: usb 1-2: new full speed USB
> device using hc-crisv10 and address 12
> Jan 1 00:02:37 axis-00408c012078 kernel: scsi10 : SCSI emulation for
> USB Mass Storage devices
> Jan 1 00:02:48 axis-00408c012078 kernel: usb 1-2: reset full speed
> USB device using hc-crisv10 and address 12
> Jan 1 00:02:48 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b8a0[203]
> Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b8a0[204]
> Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b8a0[205]
> Jan 1 00:02:49 axis-00408c012078 kernel: usb 1-2: device descriptor
> read/64, error -71
> Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b8a0[206]
> Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b8a0[207]
> Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b8a0[208]
> Jan 1 00:02:49 axis-00408c012078 kernel: usb 1-2: device descriptor
> read/64, error -71
> Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:02:50 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable
> port 2. Maybe the USB cable is bad?
> Jan 1 00:02:50 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:02:50 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:02:50 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:02:50 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:02:51 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable
> port 2. Maybe the USB cable is bad?
> Jan 1 00:02:51 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:02:51 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:02:51 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:02:51 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:02:52 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable
> port 2. Maybe the USB cable is bad?
> Jan 1 00:02:52 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:02:52 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:02:52 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:02:52 axis-00408c012078 kernel: usb 1-2: USB disconnect,
> address 12
> Jan 1 00:02:52 axis-00408c012078 kernel: 10:0:0:0: scsi: Device
> offlined - not ready after error recovery
> Jan 1 00:02:52 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:02:52 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:02:52 axis-00408c012078 kernel: usb 1-2: new full speed USB
> device using hc-crisv10 and address 13
> Jan 1 00:02:52 axis-00408c012078 kernel: scsi11 : SCSI emulation for
> USB Mass Storage devices
> Jan 1 00:03:04 axis-00408c012078 kernel: usb 1-2: reset full speed
> USB device using hc-crisv10 and address 13
> Jan 1 00:03:04 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b840[222]
> Jan 1 00:03:04 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b840[223]
> Jan 1 00:03:04 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b840[224]
> Jan 1 00:03:04 axis-00408c012078 kernel: usb 1-2: device descriptor
> read/64, error -71
> Jan 1 00:03:04 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b840[225]
> Jan 1 00:03:04 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b840[226]
> Jan 1 00:03:04 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b840[227]
> Jan 1 00:03:05 axis-00408c012078 kernel: usb 1-2: device descriptor
> read/64, error -71
> Jan 1 00:03:05 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:03:05 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:03:05 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:03:05 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:03:06 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable
> port 2. Maybe the USB cable is bad?
> Jan 1 00:03:06 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:03:06 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:03:06 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:03:06 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:03:07 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable
> port 2. Maybe the USB cable is bad?
> Jan 1 00:03:07 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:03:07 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:03:07 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:03:07 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:03:08 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable
> port 2. Maybe the USB cable is bad?
> Jan 1 00:03:08 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:03:08 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:03:08 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:03:08 axis-00408c012078 kernel: usb 1-2: USB disconnect,
> address 13
> Jan 1 00:03:08 axis-00408c012078 kernel: 11:0:0:0: scsi: Device
> offlined - not ready after error recovery
> Jan 1 00:03:08 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:03:08 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:03:08 axis-00408c012078 kernel: usb 1-2: new full speed USB
> device using hc-crisv10 and address 14
> Jan 1 00:03:08 axis-00408c012078 kernel: scsi12 : SCSI emulation for
> USB Mass Storage devices
> Jan 1 00:03:20 axis-00408c012078 kernel: usb 1-2: reset full speed
> USB device using hc-crisv10 and address 14
> Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b8a0[241]
> Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b8a0[242]
> Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b8a0[243]
> Jan 1 00:03:20 axis-00408c012078 kernel: usb 1-2: device descriptor
> read/64, error -71
> Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b8a0[244]
> Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b8a0[245]
> Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b8a0[246]
> Jan 1 00:03:20 axis-00408c012078 kernel: usb 1-2: device descriptor
> read/64, error -71
> Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:03:21 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable
> port 2. Maybe the USB cable is bad?
> Jan 1 00:03:21 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:03:21 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:03:21 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:03:21 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:03:22 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable
> port 2. Maybe the USB cable is bad?
> Jan 1 00:03:22 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:03:22 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:03:22 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:03:22 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:03:23 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable
> port 2. Maybe the USB cable is bad?
> Jan 1 00:03:23 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:03:23 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:03:23 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:03:23 axis-00408c012078 kernel: usb 1-2: USB disconnect,
> address 14
> Jan 1 00:03:23 axis-00408c012078 kernel: 12:0:0:0: scsi: Device
> offlined - not ready after error recovery
> Jan 1 00:03:23 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:03:23 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:03:23 axis-00408c012078 kernel: usb 1-2: new full speed USB
> device using hc-crisv10 and address 15
> Jan 1 00:03:24 axis-00408c012078 kernel: scsi13 : SCSI emulation for
> USB Mass Storage devices
> Jan 1 00:03:35 axis-00408c012078 kernel: usb 1-2: reset full speed
> USB device using hc-crisv10 and address 15
> Jan 1 00:03:35 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b840[260]
> Jan 1 00:03:35 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b840[261]
> Jan 1 00:03:35 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b840[262]
> Jan 1 00:03:35 axis-00408c012078 kernel: usb 1-2: device descriptor
> read/64, error -71
> Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b840[263]
> Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b840[264]
> Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_irq warn: 3rd error
> for epid:0 (in ctrl) URB:0xc045b840[265]
> Jan 1 00:03:36 axis-00408c012078 kernel: usb 1-2: device descriptor
> read/64, error -71
> Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:03:37 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable
> port 2. Maybe the USB cable is bad?
> Jan 1 00:03:37 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:03:37 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:03:37 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:03:37 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
> Jan 1 00:03:38 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable
> port 2. Maybe the USB cable is bad?
> Jan 1 00:03:38 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode
> Jan 1 00:03:38 axis-00408c012078 kernel: crisv10_rh: Physical port 2
> disabled
> Jan 1 00:03:38 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started
> Jan 1 00:03:38 axis-00408c012078 kernel: crisv10_irq dbg:
> ctr_status_irq, controller status: host_mode started running
>

> --- In foxboard@yahoogroups.com <mailto: foxboard%40yahoogroups.com>,
> "mailinglistrecipient"
> <[EMAIL PROTECTED]> wrote:
> >
> > Hi again,
> >
> > I have now tried with kernel 2.6, I dump the /var/log/messages below.
> > It didn't get better anyway.
> > The USB HDD is powerd via the USB bus itself. Let's say the
> > powersupply isn't capable of delivering the power needed, could
> > behaviours like this occure? Or wouldn't the HDD even power up if the
> > power isn't sufficient?
> >
> >
> > //John
> >
> >
>
>

__._,_.___

SPONSORED LINKS

Embedded linux

Embedded linux system

Communication and networking

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___