--- In [email protected], "rieupinfor" <[EMAIL PROTECTED]> wrote: > > Hi Geert, > I was not meaning the pullup resistors, but the damping (100ohms) > ones. One for each circuit on the i2c bus (in serie to get from the > circuits SDA pin (or SCL) to the bus line), or one for the entire bus > (on the fox side, before the bus)?. > Thanks > Oops, than it's my misunderstanding... :-(
In case of the series resistor(s): yes, it's on every device you have to put those two resistors. Sorry for the confusion. Best rgds, --Geert
