Hi Geert, Thank for your fast reply. I modify my board and give a try. Regards
--- In [email protected], "Geert Vancompernolle" <[EMAIL PROTECTED]> wrote: > > --- In [email protected], "rieupinfor" <rieupinfor@> wrote: > > > > Hi Geert, > > I was not meaning the pullup resistors, but the damping (100ohms) > > ones. One for each circuit on the i2c bus (in serie to get from the > > circuits SDA pin (or SCL) to the bus line), or one for the entire bus > > (on the fox side, before the bus)?. > > Thanks > > > Oops, than it's my misunderstanding... :-( > > In case of the series resistor(s): yes, it's on every device you have > to put those two resistors. > > Sorry for the confusion. > > Best rgds, > > --Geert >
