Wolf wrote: > > In message <[EMAIL PROTECTED]>, psykojyce writes > > > > Hello all. > > > > I would like to know if it was possible to use one 7.2v RC battery > > (3000mAh) to power supply the board (with the fox power supply : > > http://www.acmesystems.it/?id=16) ? > > >From reading the spec the answer is no. > > Power-supplies need a certain input voltage greater than the output > voltage if the regulation is to be guaranteed. > > There are specialist "Low-differential" voltage regulators available > that will maintain regulation when the input voltage is only a Volt > above the output voltage.
Why not use 2 7.2V batteries in series ? That gives 14.4V which is more than enough for the FPS to function. Peter
