Hi Stéphane Many thanks for these links.
Could be nice to build a new carrier board for the FOX Board with the TPUART chip. If you like, you could help me to define this board. Let me know what do you think about :-) Thanks Sergio Tanzilli Acme Systems srl Stéphane Herraiz wrote: > > > Hello, > I have test with success the EIBD on foxboard. > I'm using a standard bus coupler (Siemens 5WG1 148-1AB04) connected to a > serial port of the foxboard. > I'm working on an EIB interface using the TPUART chip but for MicroChip > PIC24F. > You can use this schematic > :http://www.auto.tuwien.ac.at/~mkoegler/index.php/tpuart > <http://www.auto.tuwien.ac.at/%7Emkoegler/index.php/tpuart> > You can also write an email to Fritz Praus <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> >. He can build the TP-UART board for 70€. > Another solution perhaps more easy is to use BIM Mxxx (go to > www.opternus.com <http://www.opternus.com>), it is compatible with EIBD. > Tell me inform about your work! > BR > -- > Stéphane Herraiz > > > 2007/11/3, ssmtux < [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>>: > > Hello, > > I start this new topic because I'm interested how can I connect the > foxboard to the EIB/KNX bus... > > I saw that here: > http://www.auto.tuwien.ac.at/%7Emkoegler/index.php/eibdriver > <http://www.auto.tuwien.ac.at/%7Emkoegler/index.php/eibdriver> > told about the TP-UART chip... is there a ready to use board with > this chip? > > thanks for replay! > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/foxboard/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/foxboard/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
