Hi, No problem I can work on it, I have schematic ready and I can adapt it easily for the foxboard. We need to use optocouplers to protect the board. The TPUART is powered by the EIB bus. I will work on it and keep inform you. Best reagrds
2007/11/6, Sergio Tanzilli <[EMAIL PROTECTED]>: > > Hi Stéphane > > Many thanks for these links. > > Could be nice to build a new carrier board for the FOX Board with the > TPUART chip. If you like, you could help me to define this board. > > Let me know what do you think about :-) > > Thanks > > Sergio Tanzilli > Acme Systems srl > > Stéphane Herraiz wrote: > > > > > > Hello, > > I have test with success the EIBD on foxboard. > > I'm using a standard bus coupler (Siemens 5WG1 148-1AB04) connected to a > > serial port of the foxboard. > > I'm working on an EIB interface using the TPUART chip but for MicroChip > > PIC24F. > > You can use this schematic > > :http://www.auto.tuwien.ac.at/~mkoegler/index.php/tpuart > > <http://www.auto.tuwien.ac.at/%7Emkoegler/index.php/tpuart> > > You can also write an email to Fritz Praus <[EMAIL PROTECTED] > > <mailto:[EMAIL PROTECTED]> >. He can build the TP-UART board for 70€. > > Another solution perhaps more easy is to use BIM Mxxx (go to > > www.opternus.com <http://www.opternus.com>), it is compatible with EIBD. > > Tell me inform about your work! > > BR > > -- > > Stéphane Herraiz > > > > > > 2007/11/3, ssmtux < [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>>: > > > > Hello, > > > > I start this new topic because I'm interested how can I connect the > > foxboard to the EIB/KNX bus... > > > > I saw that here: > > http://www.auto.tuwien.ac.at/%7Emkoegler/index.php/eibdriver > > <http://www.auto.tuwien.ac.at/%7Emkoegler/index.php/eibdriver> > > told about the TP-UART chip... is there a ready to use board with > > this chip? > > > > thanks for replay! > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > -- Stéphane Herraiz
