Re: DM documentation is not available on the CD
I'd like to clarify this statement. The K0173TQ-G - FoxDoc for V6.2.1 has
the following in its table of contents:
Display Builder (B0193AQ: Available in hard-copy only.)
Display Builder for 50 Series Workstations (B0193MP: Available in hard-copy
only.)
Display Configurator for 20/30 Series Workstations (B0193AR)
Display Configurator for 50 Series Workstations (B0193NL)
Display Conventions Configurator (B0193CQ)
Display Edit Utility (Help File)
Display Engineering for 50 Series Workstations (B0193MQ)
Display Engineering (Windows NT Operating System) (B0400MQ)
Display Engineering Utilities (B0193WU)
Display Manager Commands (B0193DF)
Display Reporter and Connection Editor (B0193JN)
While it is true that the configuration document is not available on the CD,
the majority of these documents are specific to the DM.
Regards,
Alex Johnson
10707 Haddington
Houston, TX 77043
713.722.2859 (office)
713.722.2700 (switchboard)
713.932.0222 (fax)
[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
-----Original Message-----
From: Corey R Clingo [SMTP:[EMAIL PROTECTED]]
Sent: Wednesday, March 21, 2001 10:11 AM
To: Foxboro DCS Mail List
Subject: RE: Version 4.3 to 6.2.1 upgrade question
Just curious: Is FoxView that bad, or is it just a pain to migrate?
I'm
relatively new to I/A. and find the legacy Display Builder a
cumbersome tool to
build graphics in (although some of the guys in the plant who have
done it more
don't complain much). I'm trying to evaluate whether to make a push
to go to
FoxView or not (it would be a gradual change even if we did, as I've
heard it is
best to rebuild existing screens in FoxDraw rather than try to
import them).
I'm not sure what Foxboro's stance is of supporting products beyond
their
"useful life" (i.e., after a newer replacement has come out), but
the fact that
DM documentation is not available on the CD looks like writing on
the wall to
me.
Corey Clingo
Sr. Engineer
BASF Corporation
"Stear, Bo" <[EMAIL PROTECTED]> on 03/21/2001 07:46:29 AM
Please respond to Foxboro DCS Mail List
<[EMAIL PROTECTED]>
To: 'Foxboro DCS Mail List' <Foxboro
cc:
Subject: RE: Version 4.3 to 6.2.1 upgrade question
It will be a dead heat as to whether you or we are the last to
migrate to
FoxView....
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company.
All
postings from this list are the work of list subscribers and no
warranty
is made or implied as to the accuracy of any information
disseminated
through this medium. By subscribing to this list you agree to hold
the
list sponsor(s) blameless for any and all mishaps which might occur
due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
