Group,
I am new to the Foxboro I/A systems and had a few
problems installing an AW70 system. This is being
used with an AB 5 with an ethernet connection.
1.First ECB64 cannot be modified or deleted without
the system locking up. To restore you must save all,
reboot, and rebuild the ECB64.
2.Once ECB63-65 are configured and working with all
white on status, you can disconnect the ethernet
link without any red indications of loss of connection.
3.The LM host and host files do not configure correctly
showing the tcpip address and system name. This
had to be done manually. If not the system would again
lockup I believe RSlogic and I/A software use this host
file, but not sure of the purpose of the LM host file?
(Window access?)
Thanks
Bruce
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All postings from
this list are the work of list subscribers and no warranty is made or implied as to
the accuracy of any information disseminated through this medium. By subscribing to
this list you agree to hold the list sponsor(s) blameless for any and all mishaps
which might occur due to your application of information received from this mailing
list.
To be removed from this list, send mail to [EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
