There are some problems with PC20 and digital communication
to the FBM's, however there is a fix for this problem.
This fix can be found on the Foxboro web site.
http://www.foxboro.com/downloads/pc20-comm-fix-legal.htm
<http://www.foxboro.com/downloads/pc20-comm-fix-legal.htm>
Loading this will solve your problem.
Den Haese Patrick
Senior System Service Engineer
Foxboro Belgium n.v./s.a.
Tel : +32-(0)3 205 14 43
Fax : +32-(0)3 232 17 98
e-mail : [EMAIL PROTECTED]
-----Original Message-----
From: Loyd Greer [mailto:[EMAIL PROTECTED]]
Sent: Monday, April 30, 2001 05:28
To: Foxboro DCS Mail List
Subject: PC20
Is anyone using PC20 with NT. I can't seem to make it
work on my laptop.
The modem appeared to work but I received an error meesage
that said the
transmitter was not recognized. With the transmitter in
analog mode it
worked. When i switched the transmitter to digital it will
no longer
communicate. I have talked with TAC and others with no luck
yet.
The modem is OK.
Thanks for any response.
Loyd Greer
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro
Company. All
postings from this list are the work of list subscribers and
no warranty
is made or implied as to the accuracy of any information
disseminated
through this medium. By subscribing to this list you agree
to hold the
list sponsor(s) blameless for any and all mishaps which
might occur due to
your application of information received from this mailing
list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail
to
[EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
