I have had this same problem. You're not alone.
______________________________ Reply Separator _________________________________
Subject: PC20
Author: "Foxboro DCS Mail List" <[EMAIL PROTECTED]> at
INTERNET-MAIL
Date: 4/29/01 10:27 PM
Is anyone using PC20 with NT. I can't seem to make it work on my laptop.
The modem appeared to work but I received an error meesage that said the
transmitter was not recognized. With the transmitter in analog mode it
worked. When i switched the transmitter to digital it will no longer
communicate. I have talked with TAC and others with no luck yet.
The modem is OK.
Thanks for any response.
Loyd Greer
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
