We're not running Windows 2000 but here are some hints....
use RLOGIN method
we remove the .profile dm startup from /opt/ia and use it in a command instead so the
command in Xstart for exceed should say:
exec /opt/ia/whateveryounamedthe.profile
The other important setting is in the 'Other' settings where you need to put -1 for
the Close (sed.) timeout.
Hope this helps.
-----Original Message-----
From: Joe Gale (MP) [mailto:[EMAIL PROTECTED]]
Sent: Thursday, May 03, 2001 7:27 AM
To: Foxboro DCS Mail List (E-mail)
Subject: Remote Displays using Exceed
We have been using exceed for years to open remote display managers using
the telnet start method without much for problems. The IT people have been
upgrading the PC's in the plant with new PC's that are running Windows2000
and have been having problems opening a DM after installing exceed. Several
have worked by installing exceed while logged in as Power User, while some
didn't work that way either. The error they get is a "connection closed(3)"
when trying to open a DM. They are able to open a x-window into another
application (a unit optimization program) running on a non Foxboro sun box
without a problem. The new installs are using the same xstart and xconfig
setups as the older installs are using. Does anyone have any ideas on what
may be the conflict here?
Thank You,
Joe Gale
DCS Administrator
Minnesota Power
Boswell Energy Center
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
