We also run /usr/foxbin/pdfpack (same usage) on our AP20 displays (for
WP30's). I'm not sure if that helps, but our trends seem to be working.
With previous software versions, we used to have to call up each trend
display and save it as "permanent" before it would fill in the trend with
recent history.
Lisa Kinoshita
Process Controls - Tosco San Francisco Refinery
(510) 245-4581
> -----Original Message-----
> From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]]
> Sent: Tuesday, October 03, 2000 10:18 AM
> To: [EMAIL PROTECTED]
> Subject: RE: AP20?, AW70?
>
> What Lance said is correct, but on an AP-20, hist_offset is in
> /usr/foxbin.
>
> Duc M. Do
> Dow Corning Corp.
>
>
> -----Original Message-----
> From: Dusing, Lance [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, October 03, 2000 1:05 PM
> To: 'Foxboro DCS Mail List'
> Subject: RE: AP20?, AW70?
>
>
> Display Issue:
> Try running hist_offset against your displays
> For example /usr/fox/wp/bin/tools/hist_offset /usr/menus/d1/displayname
> or /usr/fox/wp/bin/tools/hist_offset /usr/menus/d1 (all displays in
> directory d1)
> or /usr/fox/wp/bin/tools/hist_offset /usr/menus/*/* (all displays two
> directories under the menus directory)
>
> Lance
>
> -----Original Message-----
> From: Burnham, Rob C. [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, October 03, 2000 4:22 PM
> To: 'Foxboro List'
> Subject: AP20?, AW70?
>
>
> AP20's, WP30's running 6.1
> ? = Many trends do not show recent history, however
> data display of values shows plenty of data
> It seems to get worse with every software
> upgrade - can AP20 really run 6.1 properly?
>
> AW70 integrator, 6.1 connected to 760 controller array
> ? = Commands issued to all controllers are accepted
> by some and not by others, one problem in which
> a command to switch to Auto, resulted in controller
> toggling back and forth from Auto to Manual, a Sleep
> was added and then repeat command, this resolved
> problem for some occurences. Ones that work one day
> will not work the next.
>
> Any help or suggestions will be greatly appreciated!
>
> Rob Burnham
> P. H. Glatfelter Co.
> 920 727-2426
>
>
> -----------------------------------------------------------------------
> This list is neither sponsored nor endorsed by the Foxboro Company. All
> postings from this list are the work of list subscribers and no warranty
> is made or implied as to the accuracy of any information disseminated
> through this medium. By subscribing to this list you agree to hold the
> list sponsor(s) blameless for any and all mishaps which might occur due to
>
> your application of information received from this mailing list.
>
> To be removed from this list, send mail to
> [EMAIL PROTECTED]
> with "unsubscribe foxboro" in the Subject. Or, send any mail to
> [EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
