Florian Getting this kinda errors when using:-
# gmake distclean crosszipinstall CPU_TARGET=arm OS_TARGET=linux CROSSOPT='-dFPC-ARMEL ' without -CfSoft -darm. I am on "arm-linux-uclibcgnueabi-" symlinked to arm-linux- toolchain. regards Nataraj /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:43638: Error: selected processor does not support `stfd f0, [r13,#4]' /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:43639: Error: selected processor does not support `ldfd f0, [r13,#4]' /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45253: Error: selected processor does not support `fltd f1, r0' /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45256: Error: selected processor does not support `ldfltd f 0,[r0]' /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45257: Error: selected processor does not support `adfltd f 1,f0,f1' /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45259: Error: selected processor does not support `ldfd f0, [r0]' /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45260: Error: selected processor does not support `mufd f1, f1,f0' /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45261: Error: selected processor does not support `mvfd f0, f1' /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55571: Error: selected processor does not support `sfm f4,1 ,[r11,#-316]' /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55576: Error: selected processor does not support `stfd f0, [r11,#-304]' /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55577: Error: selected processor does not support `ldfd f4, [r11,#-304]' /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55597: Error: selected processor does not support `mvfd f0, f4' /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55607: Error: selected processor does not support `lfm f4,1 ,[r11,#-316]' /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:57015: Error: selected processor does not support `stfd f0, [r5]' system.pp(380) Error: Error while assembling exitcode 1 system.pp(380) Fatal: There were 2 errors compiling module, stopping Fatal: Compilation aborted gmake[5]: *** [system.ppu] Error 1 gmake[5]: Leaving directory `/usr/home/nataraj/software/fpc/rtl/linux' gmake[4]: *** [fpc_smart] Error 2 gmake[4]: Leaving directory `/usr/home/nataraj/software/fpc/rtl/linux' gmake[3]: *** [linux_smart] Error 2 gmake[3]: Leaving directory `/usr/home/nataraj/software/fpc/rtl' gmake[2]: *** [rtl_smart] Error 2 gmake[2]: Leaving directory `/usr/home/nataraj/software/fpc' gmake[1]: *** [build-stamp.arm-linux] Error 2 gmake[1]: Leaving directory `/usr/home/nataraj/software/fpc' gmake: *** [crosszipinstall] Error 2 On Sat, Feb 27, 2010 at 10:03 PM, Florian Klämpfl <flor...@freepascal.org> wrote: > > On Sat, 27 Feb 2010 19:17:48 +0530, Nataraj S Narayan <natara...@gmail.com> > wrote: >> Jonas >> >> >> #make distclean crosszipinstall CPU_TARGET=arm CROSSOPT='-CfSOFT -darm >> -dFPC-ARMEL -gl' > > As I said multiple times, only OPT=-dFPC_ARMEL is needed. No -CfSOFT, no > -darm, especially not in CROSSOPT. > _______________________________________________ > fpc-devel maillist - fpc-devel@lists.freepascal.org > http://lists.freepascal.org/mailman/listinfo/fpc-devel > _______________________________________________ fpc-devel maillist - fpc-devel@lists.freepascal.org http://lists.freepascal.org/mailman/listinfo/fpc-devel
