Hi Same problem with "arm-none-linux-gnueabi-" toolachain from Codesourcery also, which i presume is not uclibc based. Using this toolchain for kernel compilation,
regards Nataraj On Mon, Mar 1, 2010 at 12:18 PM, Nataraj S Narayan <natara...@gmail.com> wrote: > Florian > > Getting this kinda errors when using:- > > # gmake distclean crosszipinstall CPU_TARGET=arm OS_TARGET=linux > CROSSOPT='-dFPC-ARMEL ' > > without -CfSoft -darm. I am on "arm-linux-uclibcgnueabi-" symlinked to > arm-linux- toolchain. > > regards > > Nataraj > > /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:43638: > Error: selected processor does not support `stfd f0, > [r13,#4]' > /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:43639: > Error: selected processor does not support `ldfd f0, > [r13,#4]' > /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45253: > Error: selected processor does not support `fltd f1, > r0' > /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45256: > Error: selected processor does not support `ldfltd f > 0,[r0]' > /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45257: > Error: selected processor does not support `adfltd f > 1,f0,f1' > /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45259: > Error: selected processor does not support `ldfd f0, > [r0]' > /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45260: > Error: selected processor does not support `mufd f1, > f1,f0' > /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45261: > Error: selected processor does not support `mvfd f0, > f1' > /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55571: > Error: selected processor does not support `sfm f4,1 > ,[r11,#-316]' > /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55576: > Error: selected processor does not support `stfd f0, > [r11,#-304]' > /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55577: > Error: selected processor does not support `ldfd f4, > [r11,#-304]' > /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55597: > Error: selected processor does not support `mvfd f0, > f4' > /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55607: > Error: selected processor does not support `lfm f4,1 > ,[r11,#-316]' > /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:57015: > Error: selected processor does not support `stfd f0, > [r5]' > system.pp(380) Error: Error while assembling exitcode 1 > system.pp(380) Fatal: There were 2 errors compiling module, stopping > Fatal: Compilation aborted > gmake[5]: *** [system.ppu] Error 1 > gmake[5]: Leaving directory `/usr/home/nataraj/software/fpc/rtl/linux' > gmake[4]: *** [fpc_smart] Error 2 > gmake[4]: Leaving directory `/usr/home/nataraj/software/fpc/rtl/linux' > gmake[3]: *** [linux_smart] Error 2 > gmake[3]: Leaving directory `/usr/home/nataraj/software/fpc/rtl' > gmake[2]: *** [rtl_smart] Error 2 > gmake[2]: Leaving directory `/usr/home/nataraj/software/fpc' > gmake[1]: *** [build-stamp.arm-linux] Error 2 > gmake[1]: Leaving directory `/usr/home/nataraj/software/fpc' > gmake: *** [crosszipinstall] Error 2 > > > > On Sat, Feb 27, 2010 at 10:03 PM, Florian Klämpfl > <flor...@freepascal.org> wrote: >> >> On Sat, 27 Feb 2010 19:17:48 +0530, Nataraj S Narayan <natara...@gmail.com> >> wrote: >>> Jonas >>> >>> >>> #make distclean crosszipinstall CPU_TARGET=arm CROSSOPT='-CfSOFT -darm >>> -dFPC-ARMEL -gl' >> >> As I said multiple times, only OPT=-dFPC_ARMEL is needed. No -CfSOFT, no >> -darm, especially not in CROSSOPT. >> _______________________________________________ >> fpc-devel maillist - fpc-devel@lists.freepascal.org >> http://lists.freepascal.org/mailman/listinfo/fpc-devel >> > _______________________________________________ fpc-devel maillist - fpc-devel@lists.freepascal.org http://lists.freepascal.org/mailman/listinfo/fpc-devel
